Stratus Broadband Ceiling Cloud

• Suspends over the console or listening position
• Attractive fabric wrapped glass wool panel
• Easy to assemble suspension hardware
• Eliminates floor to ceiling reflections

The Primacoustic Stratus is an acoustical device thatsuspends above the recording console to control early reflections,flutter echo and help eliminate standing waves that cause resonant peaksin the critical mix position. Once in place, you will immediately enjoy a morecontrolled and intimate acoustic environment, larger sweet spot and reduced ear fatigue.

Attractive and very affordable, the Stratus ships in kit-form and is easily put together in minutes using a simple screw driver. The kit includes a 2″ thick, 24″ x 48″ acoustic panel made from high density 6lb per cubic foot glass wool and suspension hardware. The glass wool is encapsulated with micromesh and the edges are resin treated to retain the minute fibres. For an attractive appearance, the panel is covered in an acoustically transparent fabric.

The suspension hardware consists of two light-weight aluminum rails and “L” brackets that form a rigid frame around the panel. To hang the Stratus, simply attach the included suspension wire to the frame. Hardware and fasteners for sheet-rock ceilings are included in the kit. Typically, the Stratus would be suspended above the console and clustered in an array spanning the width of your console and listening.

The Stratus absorbs sound energy by converting it to heat. Sound energy traveling via air vibrations penetrates the panel causing the minute glass fibres to vibrate and generate heat. This thermo-dynamic energy transfer effectively absorbs directional sound energy and prevents it from reflecting into the mix position.

By itself, the 2″ thick glass wool panel is 100% effective for frequencies between 400Hz and 20kHz (see the acoustic absorption chart). To help control a broader frequency spectrum, the Stratus may be angled to vary the air space between the Stratus and the ceiling. This allows the backing surface to also absorb reflections off the ceiling.

 

Stratus Details and Specifications

The Primacoustic Stratus is an acoustic cloud system designed to create large acoustic ceilings by linking multiple units together with a rigid frame.Test data shows the suspended Stratus cloud to be very effective at absorbing sound from 100Hz and up. This is achieved by a combination of the two inch glass wool panel and the air space formed behind the panel when suspendedThe Stratus will absorb the powerful primary reflections that bounce off room boundaries as well as flutter echoes between the ceiling and floor. The fabric face and aluminum channels will look great above your listening position for years to come.The Stratus includes all mounting hardware and may be installed in one of two ways. Suspended installation uses tie-wire to hang the cloud. Flush installation attaches the Stratus directly to the ceiling. Which method you use will depend on the ceiling height and layout of your room. Either way, everything you need is in the box for fast and easy installation.

 

Physical Specifications

Panel Material:

Formed, semirigid inorganic glass fibers; Density 6.0 lbs. pcf. (96 kg/m3)

Channel Material:

Aluminum

Dimensions:

24” x 48” x 2”610mm x 1219mm x 51mm

Fabric Facing

Acoustically transparent polyester

Fabric Color Codes:

Black=00, Beige=03, Grey=08

Order Number:

Z840-1200-xx(xx denotes color code 00=Black; 03= Beige; 08=Grey)

Mounting Hardware:

Drywall anchors, eye-screws and tie wire for overhead suspension included

Extra Hardware:

Link bracket for ganging Stratus units together

Full Specifications:

Stratus Engineering Data Sheet [535k]

---

Absorption Characteristics

Mounting Style 100Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 5kHz Test Data Surface mounted

0.340.450.831.071.01.011.01.0 

2″ Offset Suspension

0.750.831.011.281.211.141.021.0 

---

 

Fire and Burn Performance for Broadway Panel Component

Test Class Flame Spread Smoke Density Test Data

ASTM E 85-051 or A15 FSI155 SD CAN/UL-S1021 or A15 FSC1155 SD

Test data provided by Bodycote Materials Testing Inc. This method, designated as ASTM E 84-05, “Standard Method of Test for Surface Burning Characteristics of Building Materials”, is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire condition.

Fire and burn test data applies to the Broadway acoustic panel only. Please consult your local building authority and/or insurance underwriter to ensure the product meets local building codes.

 

 

 

Primacoustic stock availability: Please note, due to the wide variety of options involving sizing and colour – we are not able to stock most Primacoustic products in our showroom or on-site warehousing – meaning that in-store collection is not possible without prior organisation.  Wait times for Primacoustic products can generally range from 1-2 business days if Australian-based stock is available – or up to 2-3 months if no stock available. If you see us in-store, or contact us via our website or via (02) 9635 5552 – our friendly staff will be happy to confirm this for you and let you know what the options are. We can also arrange to have goods delivered directly to you, Australia-wide.——————————Primacoustic Delivery Fee:A flat fee of $33.00 inc. GST applies to any Primacoustic order within Australia.